Karcher · New
Pressure Washer Non Detergent ND Pump Oil for Karcher Cat Kranzle Nilfisk Alto
£17.38 ex VAT · £20.85 inc VAT · In stock
1 litre non-detergent SAE 30 (ND) pressure washer pump oil.
Suits all major brands, including Interpump, Karcher, Nilfisk, Speck, Cat, Annovi and more. A premium grade mineral oil that gives superior protection against corrosion, foaming and more.
Using a standard oil creates foaming and pressure in the pump, which turns the oil milky. If the oil still turns milky after changing to a non-detergent oil, your pump will probably need new pump seals or oil seals.
Non-detergent pump oil vs detergent oil
A modern engine uses detergent oil because it has an oil filter: the oil cleans contaminants off the engine's surfaces and the filter keeps them out of the bearings. Without a filter, those contaminants build up and the oil gets dirty fast, so it needs changing often to prevent excess wear and failures.
A pump doesn't have an oil filter, which is why non-detergent oil is recommended for pressure washer pumps. With detergent oil, everything it cleans off the surfaces would keep circulating through the oil, increasing wear inside the pump.
Anti-foaming and anti-aeration additives
Air in the oil is controlled with anti-foaming and anti-aeration additives, and of the two, anti-aeration is the more important. Every pump and pump oil system contains some air. It becomes a problem when:
- Aeration causes air bubbles, which can lead to pump cavitation (unwanted chattering or vibration of the moving parts) and loss of oil viscosity (poor lubrication because of too much air).
- Foaming builds up on the oil surface and can foam over, causing extra pressure or oil leaks – easily prevented with a simple additive.
Sent boxed and sealed.
UK delivery or free collection from Burton-on-Trent. Questions? Call 07888 665847 or email Sdsmidlands@gmail.com.
Related parts
Shop by category
No parts match your search
We stock more than we list. Send us your machine model and the part you need, and we'll check for you.
Contact us
Not sure which part fits?
Ask us.
Send us your machine make, model and serial number and we'll confirm the right part before you order. We also handle trade and bulk enquiries, and can source parts we haven't listed.